Setup guide

Set up your printer in four steps

01

Unbox and place

Remove all packing tape and inserts, place the printer on a flat surface, and load paper into the tray.

02

Connect cable or Wi-Fi

Use the USB cable or follow the control panel prompts to join your home or office Wi-Fi network.

03

Install the driver

Download the driver for your model and follow the on-screen steps so your computer can send print jobs.

04

Run a test print

Print a configuration or test page to confirm the connection, paper feed, and print quality.

Troubleshooting

Fix the most common printer problems

Work through the matching issue below, then repeat the test print to check the result.

Printer not found on network

Confirm the printer and computer share the same Wi-Fi network, then restart the printer and router before reconnecting.

Paper jam or feed error

Open all access doors, gently remove jammed sheets in the paper path, and check that the tray is not overfilled.

Faded or misaligned prints

Run the nozzle check pattern, then start the head cleaning or alignment routine from the printer settings menu.

Still stuck? Reach our technical help team

If a step does not resolve the problem, contact customer assistance for hardware checks and next steps.